I downloaded the NVIDIA Installer v 398.36 for this GPU. Right now there is no display with the card inserted for me to even see what Windows is seeing. I have not tried to locate a BIOS upgrade, but maybe if I could get windows to start with the card inserted so I can at least get a VGA screen, then I could at least see what is/isn't displayed in device manager and then hopefully install the drivers. After a reboot, the display came up in VGA mode and checking device manager the card was installed, but there was a yellow exclamation triangle next to the card with the message under device status "Windows has stopped this device because it has reported problems. (When I tried to install the driver on the original PC without the card installed, it halted the install because it wasn't present when performing the system compatibility check). But I looked at the device manager and the card was not present, so I downloaded the drivers and installed them.
One thing about this PC was that its power supply is only 300W, so maybe the card would not function with a limited power supply anyway. This PC (a Windows 7 PC) displayed in VGA mode only when the monitor was plugged into the card. I took the card to another PC and replaced an NVidia Quaddro K620 with it. I then tried a DVI cable from the card to a different monitor-when powering on the power light on the monitor remained amber (standby). The HDMI cable was connected to the graphics card and not the motherboard connection.
The power supply is new, but I tried the other PCIE power cable with the same results.
Yes the PCIE power cable from the power supply was plugged into the graphics card. When I connect the HDMI cable from the card to the monitor, it displays "No Signal". First a bit more detail-the monitor that it is connected to displays "Cable Not Connected" when there is no cable connected (which is obvious).
Sorry for the delay in replying as I tested several scenarios.
0 kommentar(er)
